Next
Check out my adventures in building a Holtzapffel Inspired Workbench. In this episode we pick up ...
Today I'll show you all the rough lumber and show you how to joint 2 edges.
In this episode we'll take a look at the legs, how they were glued up and milled "4 square". After ...
Turning an African blackwood pen barrel using a 200 year-old Holtzapffel ornamental turning lathe. ...
In part 4 I'll show you the top with in Walnut stripes as well as some of the bench hardware. Then ...
In episode 5, I show you some tips using SketchUp to determine how long to make the stretchers ...
In this episode I show you how to cut the mortises for the stretchers. We'll use the bench top ...
In this episode I'll take you thru the process of marking the tenons on the table saw and then I'll ...
Installation of dowels to pin the short leg assemblies plus tips on installing bench bolts which is ...
In this episode we'll cut the top to length and bolt it to the base. Then we'll add a plane stop on ...
In this episode I'll show you part 1 of how I created my twin screw face vise using two Lee Valley ...
This is the final episode in the series. We'll complete the vise after some trouble shooting and ...
Next
